Model Number

DER04

Main Composition

Epoxy resin, Organic Modified Amine, Quartz Powder

Properties:

1. The solified compound has a high mechanical strength

2. Heat expansion coefficient is closed to the stone materials, excellent performance in cold heat cycle resistance

3. Suitable for bonding the structural parts which can bear burden

4. Used for making stone curtain ,bonding anchor

5. Water resistant ,Weather resistant, Freezing resistant ,Chemical resistant

6. High strength of adhesion

7. Adhesive for precast-concrete form

8. Adhesive for structural strengthening

9. Pattern making for marble or tile

10.  Inflammable ,safety ,non-toxic

Typical Physical properties

A part

Resin type	Epoxy resin
Aspect	Gel in white color
Viscosity(25)	10,000-30,00 .P
Density	1.5-1.6g/cm3
Storing time(10 -25 )	12 month keep in cool place
Dangerous decomposition	Usually none
Garbage discharge	Based of national and laws ,local provisions

B part

Main ingredient	Organic modified amine
Aspect	Gel in gray color
Viscosity(25 )	10,000-30,00 .P
Density	1.5-1.6g/cm3
Storing time(10 -25 )	12 month keep in cool place
Dangerous decomposition	Usually none
Garbage discharge	Based of national and laws ,local provisions

Technical data

Characters	Standard index	Tested data	Test method
Working time (25 ) min.	5-30	15	GB/T12954-1991
Working temperature/	-10-40	-10-40	GB/T12954-1991
Using temperature/	-45-90	-45-90	GB/T12954-1991
Impulsion intensity of KG/m2>	3.0	4.5	GB/T2571-1995
Shear Strength Mpa>	8.0	18.0	GB/T7124-1996
Impress strengthMPa>(stone-stone)	10.0	17.0	JC 887-2001
Impress strengthMPa>(stone-steel)	10.0	17.5	JC887-2001

Application:

Bonding stone curtain metal anchor with stones (marble, granite, quartz etc)

Bonding concert, metal anchors with themselves or with stones.
Bonding micro crystal stone, glass, ceramics.

Setting metal threaded rod, through bolt etc.

Limit for below situation:

Not suitable for surface very smoothly.

Not suitable for stone surface finished care processing.

Not suitable working in water or oil surface.

Working Method:

Surface should be clean and rough

Mix part A with part B at the ration of 1:1 (by weight) thoroughly.

Curing time (25 ) 3 hours reach initial working strength

Check Dermax AB Epoxy Glue Application Guide

Safe rules:

Keep out of reach of children. Do not swallow.

Personal protection: wearing suitable gloves, glasses or screen for face, and assure suitable local ventilation of work places. Keep suitable ventilation at the work place and keep away form fire. The adhesive and hardeners may cause chemical harms to skin and eyes. Rinse with water immediately and call a specialized doctor in serious situation.